Chapter 3 Creating and Editing Screens Revision May, 2010 3-255 Recipe Setup dialog box Recipe Retained (Non-volatile) Using this option can enable HMI to save recipe data in SRAM when the power is turned off. Address The user can input the starting address of recipe data here. It can accept the address in PLC input format and internal memory format. (Please note that if the recipe address is set to D4095, the recipe address plus the data length cannot exceed D4095.) The user also can click button to get the following address input dialog box to input the starting address. Length Set the recipe length. The unit is Word and it should be set to more than 0.
Otherwise, the following dialog box will display on the screen. Grroup Set group number of recipe. It is convenient for the user to use recipe by switching. The group number should be set to more than 0. Otherwise, the following dialog box shown as Fig. 2.8.14 will display on the screen.