Chapter 3 Creating and Editing Screens 3-256 Revision May, 2010 Recipe Setup dialog box Input After setting length and group number of recipe, the user can click Input button to edit the recipe data. The memory size for recipe is limited and the memory size for recipe is 64K. It indicates that the total recipe size should be less than 64K (The number of Length x Groups should be less than 65536). If the total recipe size exceeds the limit, the user will see a warning message displayed on the screen. The above-mentioned memory indicates the non-volatile memory of HMI, i.e. SRAM.
Some DOP series HMI, which supports USB host function, allows the user to use more recipe data via this USB host interface. Supporting USB host function means it has a built-in USB host interface. The user can connect HMI to a USB disk via this USB host interface and input more recipe data. However, there is still a limit for the input value of recipe length and groups. When Recipe Retained (non-volatile area) is selected as USB disk, the length x groups should be less than 4096K (The number of Length x Groups should be less than 4194304). The user can change the non-volatile data location by clicking Options > Configuration > General.
Open The user can load recipe data by clicking Open button. The loaded recipes do not contain the starting address of recipes. Therefore, regardless of which brand of the controller connecting to HMI, they all can use the same recipe file. There are two recipe file types provided in Delta DOP series HMI, one is 16bits recipe file (*.rcp) and the other is 32bits recipe file (*.csv) that can be opened in Windows® Excel environment. Please pay close attention to the format of recipe file and make sure that the recipe file is a 16bits data or a 32bits data. Do not select the incorrect data format; otherwise the program will not work normally.
Save When Save button is pressed, HMI will save the editing recipe data as a file, click When saving the recipe file, the starting address will not be saved. This lets the user use the same recipe file in the different PLC brand. The user can save the recipe file as Windows Excel CSV file. Reset When Reset button is pressed, all related recipe settings and input recipe data are deleted. There is no other method to retrieve the recipe except for using Import function to import the saved recipe data again.