Chapter 3 Creating and Editing Screens Remark Var1 can be the controller address or internal memory (BIT). Example Set the 5th Bit within the internal memory $0 to be ON. If $0 = 0000000000000000, after the operation, $0 = 0000000000010000 BITOFF (Set Specific Bit to be OFF) Equation BITOFF Var1 Explanation This command sets Var1 bit to be OFF. Remark Var1 can be the controller address or internal memory (BIT). Example Set the 5th Bit within the internal memory $0 to be OFF. If $0 = 1111111111111111, after the operation, $0 = 1111111111101111 3-352 Revision May, 2010