Chapter 3 Creating and Editing Screens Sampling History Buffer Flag Bits 0 to 11 control the sampling history buffer operation of HMI by the PLC. When this flag is turned ON, HMI performs sampling one time. To control the sampling history buffer flag again, this flag must be turned OFF and then ON again. Fig.
3-4-6 History Setup Revision May, 2010 3-31 Corresponding Flag Corresponding Binary Display of Relative Buffer Area Bit Function Position (x) Buffer Area 4 3 0000 0000 0000 x000 Sampling History Buffer 4 Buffer Area 5 4 0000 0000 000x 0000 Sampling History Buffer 5 Buffer Area 6 5 0000 0000 00x0 0000 Sampling History Buffer 6 Buffer Area 7 6 0000 0000 0x00 0000 Sampling History Buffer 7 Buffer Area 8 7 0000 0000 x000 0000 Sampling History Buffer 8 Buffer Area 9 8 0000 000x 0000 0000 Sampling History Buffer 9 Buffer Area 10 9 0000 00x0 0000 0000 Sampling History Buffer 10 Buffer Area 11 10 0000 0x00 0000 0000 Sampling History Buffer 11 Buffer Area 12 11 0000 x000 0000 0000 Sampling History Buffer 12 12-15 xxxx 0000 0000 0000 Reserved