US Army Materiel Command AMCP 706-250 — Engineering Design Handbook: Guns Series — Guns-General

Downloaded from https://www.everyspec.com Before the Civil War, there was little manufac- turing of cannon in this country, and at the be- ginning of that conflict, it became necessary to purchase much of this equipment abroad. At that time, there were various models of various sizes of cannon for use in fortifications. These weapons included brass guns, brass mortars, iron guns, and iron howitzers. verted to percussion locks prior to or during the Civil War. This was made possible by the inven- Mk tion of the percussion primer, which in turn made possible the metal cartridge case which provided effective obturation, which in turn resulted in adoption of the breech-loading system.

Theh the use of rifling became practicable in all guns. A distinctly American development in fixed or harbor defense artillery was reached early in the 20th century with the adoption of the disappearing carriage. This enabled the gun to rise over a parapet to fire, but was withdrawn, by recoil forces, behind the parapet for reloading. As weapons improved and better ammunition became available, the magazine rifle was developed to meet the demand for increased firepower. The famous Winchester '73 was among the early suc- cessful magazine rifles. It provided a magazine which held several rounds of ammunition, and means for transferring them to the chamber.

Re- duction of caliber, improvement in propellants which permitted use of smaller charges, and reduc- tion of size and weight of cartridges simplified the problem. Another fixed artillery piece, the barbette car- riage, was a permanently emplaced carriage which was capable of traversing through large angles except as limited by protecting turret or casemate. After the period of the Civil War interchange- ability of parts was provided. This era had been ushered in by Eli Whitney (of cotton gin fame) who first applied the principle of interchangeable parts and mass production in the manufacture of a large number of rifles for the government.

1-6.2 Mobile Artillery The appearance of the French 75 in 1897 spurred American designers to a series of notable develop- ments, and many models were made in 3-, 4.7-, 6-, and 8-inch calibers with various carriage and re- coil mechanism arrangements. Little money was available, however, to actually manufacture these guns for issue, so that, upon entering "World War I in 1917, it was found desirable to adopt weapons for which production facilities existed. At that time, the French 75-mm, model of 1897, and the American 75-mm gun, model of 1916, were adopted. They were followed shortly by a 75-mm gun of similar but British design, the model of 1917.

The modern military rifle was perfected in all its essentials by about 1890. Since that time de- tails have been refined, smokeless powder has re- placed black powder, improved ammuntion has been provided, and better metals have become available. The trend has been toward higher velocities, greater firepower, and less weight. As will be noted below, American inventors pioneered in the development of machine guns. Similar action brought into our Armed Forces the French 155-mm gun (Filloux). This weapon was more familiarly known as the G.P.F. after its French designation Grande e Puissance Filloux (gun of great power). There was also a French 155-mm howitzer of Schneider design adopted.

1-7 Development of Automatic Weapons The development of automatic features and of full automatic weapons was in response to the demand for increased firepower. The early weapons employed multiple barrels on a single mount, which could be fired simultaneously. Other arrange- ments which were developed permitted the firing of multiple barrels successively, or brought mul- tiple chambers successively to a single barrel. These did increase considerably the volume or rapidity of fire but automatic loading had not yet been worked out. Moreover, they were very heavy and cumbersome. In order to facilitate coast defense, the railway mount was put into service.

Large caliber guns up to 16 inches were mounted on specially built railway cars. The materiel was fired from the rail- way car mountings after suitable supports and outriggers were in place. 1-6.3 Small Arms The flintlock rifle served the American pioneer, the Revolutionary War soldier and, to some extent, the Civil War soldier. Most flintlocks were con- The development of automatic weapons was hastened by the invention of the percussion primer, the adoption of breech loading, and introduction