Downloaded from https://www.everyspec.com 3-6.2 and 3-6.3 and Figure 2-9). Some models capable of automatic fire are provided with a mechanical support to facilitate maintenance of alignment with the target while firing. Figur» 2-9. Typical Rifle {Semiaufomafic) This term applies both to automatic guns of bore size, power and effective range comparable to the shoulder-fired rifle, and to more powerful auto- matic guns, when the mechanism is designed to extract successive cartridges from a belt or equiva- lent means of continuous feed, instead of from a magazine of limited capacity (see Figure 2-10).
Partial or complete mechanical support is provided, and the amount of support and type of supporting structure depending on the weight and power of the gun and the resultant aid needed by the opera- tor for directional control of fire. 2-2.2.6 Machine Gun 2-2.2.4 Carbine A carbine is a shoulder-fired gun similar to the rifle, but reduced in weight, barrel length, and effective range. It replaces the rifle in uses where increased ease of portability is of greater impor- tance than the higher power and longer accurate range of the rifle.
2-2.2.5 Submachine Gun This term is applied to a short-barreled, auto- matic-firing weapon using a larger, heavier bullet than the shoulder-fired rifle, but producing a rela- tively low projectile velocity effective only at short ranges. It is furnished with a stock and hand grip to permit firing either from the shoulder or from two-hand support at the side of the operator. The submachine gun employs a magazine of several times the capacity of the standard shoulder-fired rifle, and is used for rapid firing of a large number of projectiles against personnel at short ranges, where high accuracy of fire is not essential. Figur* 2-70. Typical Machine Gun