US Army Materiel Command AMCP 706-250 — Engineering Design Handbook: Guns Series — Guns-General

Downloaded from https://www.everyspec.com CHAPTER 3 CLASSIFICATION AND DESCRIPTION BY DESIGN FEATURES While development of guns for military uses has resulted in a varied assortment of sizes and types of construction and mechanism, a number of con- structional features and terms are common to many types. Figure 3-1 illustrates and identifies some such features and terms for gun tubes, cartridge cases and projectiles. 3-1 Common Features single unit. All recent small arm guns fall into this category; also current cannon of such size that the assembled ammunition unit is not excessively un- wieldy.

In current breech-loading weapons, the propellant and primer are contained in a cartridge case with rear end closed and front end crimped or tightly fitted to the base of the projectile. The case fits the chamber closely, and pressure of the ignited propellant expands it against the chamber walls to seal against rearward escape of gas. Hence, the breech-closing structure of the gun need not be gas-tight, but must support the case to prevent its rupture or rearward displacement, and must open to permit insertion of the round and removal of the case after firing. Means must be provided to fire the primer, and to remove the case.

3-2 Methods of Classification In a previous chapter we have taken up the clas- sification of guns by military characteristics or usage. Guns are also frequently classified accord- ing to design features. Such features include the type of ammunition for which designed, as well as characteristics of the bore, the breech, and the operating mechanisms.

3-3 Classification by Ammunition Type 3-3.2 Semifixed Ammunition (see Figure 3-4) For breech-loading weapons, semifixed ammuni- tion differs from fixed in that the case is removably fitted to the projectile, so that the latter may be removed to adjust the quantity of propellant in the case, then reassembled prior to insertion of the round into the gun. Guns utilizing this type of ammunition are such cannon as require various quantities of propellant for effective firing into variously distant zones. Breech closure require- ments are similar to those for fixed ammunition.

Since performance results from interaction of gun and ammunition, design and development of the two are closely interdependent. As a result of this relationship, there have evolved several general types of complete round ammunition units for use in guns, and corresponding appropriate gun designs. The gun design requirements differ, mainly, in the types of breech closure. One method of classification of guns is by designation of the type of ammunition for which designed. Several types of ammunition design, used for such classifi- cation, are given below. A variant of semifixed ammunition is used in muzzle-loading mortars incorporating a perma- nently closed breech.

This round uses no cartridge case about the propellant, but embodies a primer fixed in a rearward-extending axial boom on the projectile, and a series of bags containing definite quantities of propellant, each separately and re- movably attached to the projectile boom. For this 3-3.1 Fixed Ammunition (see Figures 3-2 and 3-3) This term applies to ammunition of which all parts of each round are mutually attached, so that the round is handled and inserted into the gun as a