US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles

Downloaded from https://www.everyspec.com 'IA 49 iii (a) U-TYPE CRADLE F__ 'I (b) 0-TYPE CRADLE Figure 5. Forces on Recoiling Parts where primary force found only in double recoil systems. A detailed discussion of these forces F 2 = inertia force of secondary recoiling parts appears in Reference 2.

Mt = W 1 /g, mass of primazy recoiling parts It is assumed that the reactions R , and R 2 m 2 = W 2 /g, mass of secondary recoiling parts are uniformly distributed on the bearings but, R = secondary recoil force if the mating bearing surfaces are continuous, a triangular loading distribution is assumed, The terms double recoil system, primary re- with distance between load centers equal to coiling parts, and secondary recoiling parts are two-thirds of the total length. After ft and f2 defined in the glossary. The forces applied to are written in terms of R, and R?, there remain the secondary recoiling parts, F 2 and R, are three unknown values, namely, R 1 , R 2 , and Kn.

not applied to the cradle. Each appears These can be obtained by solving the'three merely as the means for determining F1, a equations of static equilibrium. 1 - 6 L ......