US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles

Downloaded from https://www.everyspec.com RRL RR t (a) U-TYPE _._CRADLE F i Frr R9 F FE EQUILIBRATOR FORCE Rq = ELEVATING GEAR LOAD RAN: SHEAR REACTION ON KEY dt RAL: LEFT BOLT REACTION Rft= RIGHT BOLT REACTION (b) 0-TYPE Figure 10. Elevating Arc CRADLE ment then must be secured in a manner which will preclude objectionable misalignment under Fr load. This requires close fitting machined surfaces held together by shear connections such as body-bound bolts, keys, pins, or shafts. Fr Figure 10 illustrates the use of a key and bolts. It also shows the loads on the attachments 24. The action of equilibrators practically eliminates the gear load except during eleva- tion and recoil.

The largest load usually oc- curs during recoil. Only if the trunnions and cradle must also transmit the rifling torque to the center of gravity of the recoiling parts lie the top carriage. Figure 11 shows the torque on the bore axis will no additional gear load be reactions on the cradle and the distances be- applied during recoil. Figure 8 illustrates the tween load centers. applied external loads on the cradle for a single The approximate rifling torque equation recoil system. In a double recoil system, the between arc and cradle.

additional inertia loads F, and F, are produced T- 0"2RPU(9) by the secondary recoil acceleration* and are N( applied horizontally at the centers of gravity is derived from the basic torque equation of the primary recoiling parts and the cradle T, = 1, (9a) (Figure 9). The reaction on the gear, R,, is computed by taking moments about the trun- The derivation includes the following syin- nions. The trunnion reactions, parallel and bols normal' to Lhe bore axis, are found by bringing Ab = bore area (less rifling groove area) the force system into equilibrium, a = linear acceleration of projectile a, = peripheral acceleration of projectile 4.

Aachment for Transrnitting Rifling Torque at the bore 25. In addition to supporting the tube, the I,, = mass moment of inertia of projectile * Reference 2, Chapter XI. k = radius of gyration of projectile 1I