US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles

Downloaded from https://www.everyspec.com work must be performed in the field where 62. There are five unknown quantities: the ) regular handling equipment is normally not vertical reactions R, and R, the frictional available, thus increasing the burden of main- forces f, and ft, and. the recoil rod force Kv. tenance crews. If feasible, each subassembly These are found by balancing the loads and should be designed so that it will not interfere moments; but first, the inertia forces F. and with the dismantling of other components. F, must be calculated.

From Equation 6 When this practice is followed, only those K cos 0- W, cos 0 sin 0-R parts requiring attention need be removed, = KI leaving the undamaged ones undisturbed. 1 + M sin This will expedite maintenance in the field particularly from the handling viewpoint. F 2 = - 20,000 lb 60. Failure of the primary structure can 1.535 2 often be repaired by welding. Hence, the From Equation 5 selection of a weldable material while the F2 F2 20,000 cradle is in the design stage may prove to be a 2 = w = - 1 4 -ig = - - an asset. Other repairs involve sliding sur- faces. Scored or galled surfaces can be scraped From Equation 4 and hand polished until smooth.

If damage is WF = 10,000 1.43g = 14,300 lb too extensive, they must be replaced which is F = -9- a2 - g relatively easy if bronze liners are used. But if the danage is on the steel surface of a Slide From Equation 3 integral with the main structure, the entire F. = F + W, sin 0 - K - F, cos 0 cradle may have to be scrapped. This empha- = 1,810,000 + 8700 - 150,000 - 7200 sizes the need for good design practice with re- = 1,661,500 lb spect to maintenance. Those members of a All information is now available to solve for structure which have a critical function and the five unknowns. which are prone to damage should be made detachable. V= 0 R, - R 2 -F, sin 0- W, cos0 =0 R2 = R, 17,400 VI.

SAMPLE PROBLEM, O-TYPE1 CR L = 0 CRADLE From Equation 2 A. LOAD ANALYSIS KR- + f, + f. - K = 0 61. An O-type cradle is selected for the but 11 = ARi = 0.15R, sample problem involving a double recoil and A2 = R 2 = 0.15R, - 2600 gun carriage. Figure 5b represents the load- ing diagram for the analysis, Except for the therefore center of gravity, all forces and their respective KR = K - (h' + f2) = 152,600 - 0.30R, locations are as shown. The center of gravity lies on the line of action of Rt. a = 80 in d = 0.10 in (c - e)KR +a(F, sin 0 + W, cos 0) + eF, b =0 e = 7in - (e-d)(F.

+Fcos0- Wsin0) c = 16 in h = 7in - (a- b) R- (e+h)fl = 0 W, = 10,000 lb, primary recoil weight 9KR + 80 x 17,400 + 7 X 1,810,000 - 6.9 W2 = 14,000 lb, secondary recoil weight X 1,660,000 - 80 R - 14 X 0.15 R, = 0 F, = 1,810,000 lb, propellant gas force Substituting for KR and solving for R K = 150,000 lb, primary recoil resistance R = 40,000 lb, secondary recoil resistance 84.8 R, = 3,981,000 = 0.15, ccefficient of friction R, = 46,900 lb 0 = 60, angle of elevation R 2 29,500 lb 23