US Army Materiel Command AMCP 706-341 — Engineering Design Handbook — Carriages and Mounts Series: Cradles

Downloaded from https://www.everyspec.com 7,000 lb reference to Figure 5b, the trunnions are - f2 = 4,400 lb located 5.0 inches to the left of R 2 . Ki = 138,600 lb Mr The cradle liners have a diameter of 14 RR. cos 0 + rFe -- r, cos 2 V, inches and are 10 inches long - d(F. + F, cos 0 - W, sin 0) - r, sin o 2 H, A , 10 X 14 = 140 in 2, bearing area -rt cos ot(Fl sin 0 + Wt cos 0) 0 R. = _ 3 b - RR, cos f = 36 X .940R. = 33.8R. Ob-r Abr rFa = 12 X 35,300 = 424,000 This presure is acceptable according to Para- r, cos . = 25 X 6900 172,000 graph 28 r sin = 0 63. Calculate the equilibrator force, Fs, by d(F.

+ F 1 cos 0 - Wt sin 0) balancing the weight moment of the tipping - 0.10 X 1,660,000 166,000 parts about the trunnions. -Referring to r o ol (F, sin 0 + W, cos 6)- Figure 9, = 75 X 17,400 = 1,305,000 Mf = rWj COS (0 + 1) + rW 0 COS (0 + 02) 33.8R, = 1,219,000 lb-in = 424,000 lb-in where r, =75in 8 = 60' = 25 in =04, 65. The trunnion reactions FA and Fv are = 10,000lb 2 = 00 found through the summation of forces W/. = 4000 lb parallel and perpendicular to the center line of The equilibrator force at elevation 0 = 600 the bore is found by equating the equilibrator moment FN = (F, sin 0 + W, cos 0) + V, to the weight moment.

+ F, sin (0 + X) - R, cos (0 + y' - rFz = M = 424,O lb-in= 17,400 + 6900 + 0.985 X 35,300 whenr = M2 in - 0.423 X 36,100 = 43,800 lb Fx = 35,300 lb, equilibrator force FA = F, - (F. + F, cos 0 - W, sin 6) + H, 64. The reaction on the elevating gear arc, - FE CO + X) - Rsin (0+,y -,0) R,, is found by balancing the moments about = 1,810,000 - 1,660,000 + 600 - the trunnions. Before continuing, the forces 0.174 X 35,300 - 0.906 X 36,100 at the center of gravity of the cradle should be = 111,800 lb resolved into components parallel and perpen- dicular to the bore. Again referring to Figure B. ELEVATING ARC 9, the inertia force caused by secondary accel- 66.

With reference to Figure 22, the loads at eration is the attachments of elevating arc to cradle are F, =W. 4000 1.439 = 5700 lb calculated by resolving the equilibrator and = a 9 1--3- gear tooth loads about these attachments. H, = W, sin 0 - F, cos 0 = 600 lb, The key provides the shear resistance for the parallel to bore resultant horizontal load. Take moments V, = W, cos a + F, sin 0 = 6900 lb, about the intersection of RER and RR, and perpendicular to bore solve for RRL. Additional dimensions for Figure 9 are 3 2Ru:L = 25.85R, cos 250 + 13.14R, sin 250 - x =200 1.15F 8 sin 800 + 9.0FR cos 800 = 1,061,000 )y = 20 25.85R, cos 250 = 25.85 X 32,700 = 845,000 = 250 13.14R.

sin 250 = 13.14 X 15,300 = 201,000 = 200, pressure angle of gear tooth 1.15Fs sin 80 ° = 1.15 X 34,800 = 40,000 R, = 36 in, pitch radius of elevating arc 9.0F. cos 800 = 9.0 X 6100 = 55,000 The applied loads and dimensions are those RRL = 33,200 lb used in the previous sample problem. With Rtl = Re. +Fn sinSO 0 - R~sin25 0 = 52,7001b 24