US Army Materiel Command AMCP 706-117 — Environmental Series, Part Three: Induced Environmental Factors

Downloaded from https://www.everyspec.com AMCP 706.117 BAT 0011b M onioo Mu_ MUMU Hyrocarbo Mo I (5) Electroch~emical corrosion. An electrochemical the rate of corrsion Is very slow bug when exceeded *process is believed responsible for the initial rusting of produces a rapid rise In the rate of corrosion. Rain can steel in the atmosphere. The settling of particulate mat- Incease the corrosion rote of some metals while It de- ter on a steel or any ferrous metal surface can create csvues that of others. By washing the surface of a *small electrochemical cells.

The electrolyte may form specimen, rain can remove corrosive pollutants that have from water and natural or pollutant ions scavenged collected on the surface, thus reducing the corrosion from the atmosphere. An electric current results, i.e., rate. In other cases it can remove soluble corrosion metal goes into solution at the anode and hydrogen is products that had been protecting the metal against deposited at the cathode, when a difference in potential further corrosion. Fops and dlews are, in general, darn- exists between any two surfaces contacting the decs.

aging because they have tao washing effect on the surface trolyte, Surfma'e potential differences between two met- but rather form surface films of moisture which absorb als or two areas of a metal surface can provide the pollutants from the ataitosphere. driving potential for the corrosive action. (2) Temperature, Temperature influences the rate of those chemical reactions that cause material deterio- ration. The temperature also determines the rate of 2-7.2 FACTORS THAT INFLUENCE drying or the length of time that a surface remains wet.

ATMOSPHERIC DETERIORATION During an atmospheric temperature inversion, exposed L NAM5 The severity with which atmospheric pollutants at- objects, especially metals, lose heat rapidly and cool to tack materials will in general vary with the locale and temperatures below that of the ambient air. If their the season.

The rate of attack is influenced by the rela- surface temperature falls below the dewpoint, the sur- tire humidity, the extent of industrial pollution, the face becomes moist and, in the presence of corrosive quantity and frequency of rainfall, air movement char- pollutants whose concentrations are increasing due to the temperature inversion, creates a situation condu- acteristics, the frequency of occurrence and duration of cive to material damage (Ref. 5). fog, the proximity to the sea, the amount of solar radia- (.Y) Solar radiation. Sunlight energy is an important *tion, and temperature ranges. element in the nitrogen dioxide phtotolytic cycle in (1) Moisture.

There .,uuld be very little, If any, at- which damaging agents such as ozone and hydrocarbon mospheric corrosion even In the most severely polluted free radicals are formed in a series of complex photo- envlronmenta without moisture (Ref. 7). Most metals chemical reactions in the atmosphere (Ref. II). have a critics] relative humidity threshold below whlch (4) Air movement. Air movement serves to disperse 2.5