Hantek — DPO7000 UserManual

Measure EN 8. -Duty: indicates the ratio of the negative pulse width to the period. 9. Bandwidth: The time from the first edge of the data source to the last edge of the data source. 10. MaxTime: indicates the time that corresponds to the maximum value of the waveform (Vmax). 11. MinTime: indicates the time that corresponds to the minimum value of the waveform (Vmin). 10.2.2 Count value parameters 1. Positive Pulse Count [+ Pulse Count]: The number of positive pulses rising from be-low the lower threshold to above the upper threshold. 1 2 3 n n-1 Threshold upper limit Threshold lower limit 2. Negative pulse number [- Pulse Count]:

the number of negative pulses from above the upper threshold to below the lower threshold. Threshold upper limit Threshold lower limit 1 2 n-1 n 3. Rise Pulse Count: The number of rising edges rising from below the lower threshold to above the upper threshold. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 108 Thres Thre