Hantek — DPO7000 UserManual

Measure EN ⚫ Horizontal and vertical parameter measurement Press [Meas] -> Add -> Source A , rotate the multi-functional knob to select the channel to be measured, and press the knob to select it. You can also continuously press the source A button to switch to the current measurement source, or use the touch screen function to select using touch gestures. Optional channels include CH1-CH4, Math1-Math4, D1.0-D1.3, D2.0-D2.3, D3.0-D3.3, D4.0-D4.3, Ref. ⚫ Measurement of other parameters Press [Meas] -> Add -> Source A and Source B to set the two source channels for the current measurement type. Optional channels include CH1-CH4, Math1-Math4, D1.0-D1.3, D2.0-D2.3, D3.0-D3.3, D4.0-D4.3, Ref. 3.

Remove: Press [Meas] -> Add -> Remove to enter the delete detailed menu settings. 10.3.2 Remove Press [Meas] -> Remove to enter the delete settings menu. 1. Remove Click on the Remove menu tab to delete the last measurement item added. Note that pressing this soft key once will only delete one measurement item. When deleting a measurement item, the measurement result at the bottom of the screen will shift to the left and display one item. 2. Remove All Click to Remove All menu labels and delete all displayed measurement items with one click. 3. Statistic Click on the Statistic menu tab to open the statistics function. For a detailed introduction, please refer to the Statistics section.

10.3.3 Statistic Calculate and display the current value (Cur), average value (Avg), maximum value (Max), minimum value (Min), standard deviation (Dev), count (Cnt), and histogram of the measurement results, as shown in the following figure. After turning on the statistical histogram, the bar histogram at the bottom of the statistical area displays the number of measurement results counted in the form of columns, allowing users to visually view the distribution of the measured values of this parameter. The color of the histogram matches the color of the specified source. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 114