Hantek — DPO7000 UserManual

Measure EN 1. Statistic Click on the Statistic menu tab to open the statistics function. 2. Reset Stat. Click on the Reset Stat. menu tab to clear historical data and perform statistics again. 3. Count Click on the Count menu tab, rotate the multi-functional knob, or set the number of counts through the pop-up numeric keypad. The value range is 2 to 100000, with a default of 10. 10.3.4 All Measure All measurements can display all the parameters of the current measurement source on the screen. Press [Meas] -> All Measure , select to turn off all measurement functions (OFF) or select the channels CH1-CH4 that need to be measured.

If CH1 channel is selected, all measurement parameter data of CH1 channel will be displayed on the screen. Note: The deletion operation will not clear the measurement results of all measurement functions. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 115