Hantek — DPO7000 UserManual

Measure EN AX: The X value at cursor A. BX: The X value at cursor B. AY: The Y value at cursor A. BY: The Y value at cursor B. BX-AX: Horizontal spacing between cursors A and B. BY-AY: The vertical spacing between cursors A and B. |1/dX |: The reciprocal of the horizontal spacing between cursors A and B. 1. Select: Click on the Select menu tab and select the cursor type X or Y. ⚫ X: The X cursor is a vertical solid line (cursor A) and a vertical dashed line (cursor B), usually used to measure time parameters. The measurement results include AX, BX, △ X, and 1/ △ X (only displayed when "s" or "Hz" is selected for "horizontal units"). ⚫ Y:

The Y cursor is a horizontal solid line (cursor A) and a horizontal dashed line (cursor B), usually used to measure voltage parameters, and the measurement results include AY, BY, and △ Y. 2. Source: Click on the Source menu tab, and the optional source channels are CH1-CH4, Math, or LA. ⚫ Only the currently open channels are selectable. ⚫ When the source selects "LA", the selection menu is grayed out and cannot be changed. By default, the "X" cursor type is selected. 3. AX: Click on the AX menu label to select the horizontal position of cursor A. After selection, rotate the knob V0 to adjust the cursor position. 4. BX:

Click on the BX menu label to select the horizontal position of cursor B. After selection, rotate the knob V0 to adjust the cursor position. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 118