Measure EN ⚫ X Cursor The X cursor is a vertical dashed line used for horizontal adjustment, which can be used to measure time (s) and frequency (Hz). ⚫ Y Cursor The Y cursor is a horizontal dashed line used for vertical adjustment, which can be used to measure amplitude (consistent with the amplitude unit of the source channel). Click the [Cursors] in the button area to enter the cursor setting menu. The selected modes include: None, Manual, and Tracking. When selecting a manual cursor or tracking cursor, a cursor measurement window will appear on the screen, displaying the measurement results.
10.5.1 Manual Mode In manual cursor mode, the value of the specified signal source waveform at the current cursor can be measured by manually adjusting the cursor. If the settings of parameters such as cursor type and measurement source are different, the results obtained by using the cursor will also be different. Click the [Cursors] in the button area to enter the cursor setting menu. The cursor defaults to off mode. Click on the Mode menu tab and select the cursor mode as manual. In the window where the measurement results are displayed, the window can be moved. By changing the cursor position, the measurement results also change in real-time.
Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 117