System Utility Function Setting EN ⚫ IP loss: (IP lost) ⚫ Please wait...: (Please wait...) ⚫ Auto IP Config Succeeded!: (Automatic IP allocation successful) ⚫ Auto IP Config Failed!: (Automatic IP allocation failed) 2. IP Config Mode The IP Config Mode include DHCP, Auto IP, and Static IP. Under different methods, the configuration methods for network parameters such as IP addresses vary. ⚫ DHCP: Click on the IP Config Mode menu tab and select Set as Dynamic IP. When the dynamic IP is valid, the dynamic IP server in the current network will assign IP address, subnet mask, gateway address, domain name server address and other network parameters to the oscilloscope. ⚫ Auto IP:
Click on the IP Config Mode menu tab and select Set as Dynamic IP. In the automatic IP mode, the oscilloscope automatically acquires the IP address and subnet mask 255.255.0.0 from 169.254.0.1 to 169.254.255.254 according to the current network configuration. Automatic IP only takes effect when dynamic IP is not selected or connection fails. ⚫ Static IP: Click on the IP Config Mode menu tab and select Set as Static IP. When this mode is effective, manually turn off dynamic IP and automatic IP, and the menu of setting IP address, setting subnet mask, setting gateway address, and setting DNS address will be added.
At this point, users can customize network parameters such as the IP address of the oscilloscope. ➢ Set IP Address The format of the IP address is nnn. nnn. nnn. nnn. The first nnn can be set in the range of 0 to 255 (excluding 127), with a valid range of 0 to 223. The other three nnns all have a range of 0 to 255. It is recommended to consult your network administrator for an available IP address. Press the IP Address key to pop up the numeric keypad and enter the desired IP address. This setting will be saved in non-volatile memory.
If "Power on Call" is set to "Last Value", the next time the device is turned on, both dynamic IP and automatic IP will be turned off, and the oscilloscope will automatically load the set IP address. ➢ Set Subnet Mask The format of the subnet mask is nnn.nnn.nnn.nnn, where nnn ranges from 0 to 255. It is recommended that you consult your network administrator for an available subnet mask. Press the Subnet Mask key, a numeric keypad will pop up, and enter the DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 132