Hantek — DPO7000 UserManual

System Utility Function Setting EN required subnet mask. This setting is saved in the non-volatile memory. If the "power on call" is set to the "last value", the dynamic IP and automatic IP will be turned off when the next power on, and the oscilloscope will automatically load the set subnet mask. ➢ Set up Gateway In Static IP mode, you can set up a gateway. The format of the gateway is nnn. nnn. nnn. nnn, with the first nnn ranging from 0 to 223 (excluding 127) and the other three nnns ranging from 0 to 255. It is recommended to consult your network administrator for an available gateway address. Press the Gateway key, pop up the numeric keypad, and enter the desired gateway address.

This setting is saved in non-volatile memory. If the "power on call" is set to "last value", the next time the power is turned on, both dynamic IP and automatic IP are turned off, and the oscilloscope will automatically load the set gateway address. ➢ Set Domain Name Server Address In static IP mode, you can set the domain name server address. The address format of the domain name server is nnn.nnn.nnn.nnn, with the first nnn ranging from 0 to 223 (excluding 127) and the other three nnns ranging from 0 to 255. It is recommended to consult your network administrator for an available address. Press the DNS key, pop up the numeric keypad, and enter the desired address.

Generally speaking, users do not need to set the domain name server address in the network, so this parameter setting can be ignored. 3. MAC Address For an oscilloscope, the MAC address is always unique. When assigning IP addresses to instruments, they are always identified by MAC addresses. 4. VISA Address Display the VISA address currently used by the oscilloscope. 13.1.2 RS232 Configuration Click on [Utility] in the button area to enter the menu, click on the I/O menu label, select RS232, and enter the RS232 settings menu label. Click on the Baud Rate menu tab and select Baud Rate from the pop-up menu. 13.2 Beeper [Utility] -> Beeper . The sound can be selected to be turned off or on.

Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 133