System Utility Function Setting EN numeric keyboard or V0 knob. Click on the Y Mask menu tab and set the vertical tolerance range on the pop-up numeric keyboard or V0 knob. Click on the Create Rule menu tab to apply the currently created rule. 2. Load Rules Click on the Mask menu tab in the Test menu to enter the Mask Settings menu, select Load Rules, and enter the Settings menu. Click on the File Type menu tab, and the file types you can choose are: *. stp or *. ptr. Click the Load menu tab to call out the stored files from the machine's internal memory or external memory (successfully connected to the USB flash disk) and apply them to the current passing test function. 3.
Save Rule In the pass test menu, users can enter the mask menu to customize the pass/fail test rules. Enter the Test Settings menu, click on the Mask Menu tab to enter the Mask Settings menu, select Save Rules, and enter the File Save menu. Click on the File Type menu tab and select the file save type, which can be *. stp or *. ptr. Click on the File Name menu tab to modify the file name. Click on the Window menu tab to choose whether to open or close the window. Click on the Save menu tab to save the settings file in the machine's internal or external memory (external memory USB flash drive has been recognized on the machine).
13.4.5 Option Click on the Option menu tab in the Pass/Fail menu to enter the Options Settings menu. 1. Aux Output: Click on the Aux Output menu tab to choose whether to turn on or off the Aux output function. If set to enable Aux output function, then [Utility] -> System -> AUXOut will automatically be set to pass the test. If the Aux output function is turned off, then [Utility] -> System -> AUXOut is automatically set to trigger output. 2. Output Event: Click on the Output Event menu tab to select either pass or fail. 3. Output polarity: Click on the Polarity menu tab to select positive or negative pulses. 4. Output Pulse Width:
Click on the Pulse menu label, and the range of output pulse width can be selected from 100ns to 100ms. Set the pulse width through the pop-up numeric keypad. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 136