Hantek — DPO7000 UserManual

System Utility Function Setting EN 1. Play Mode: Click on the Mode menu tab to choose between looping or single playback. ⚫ Loop playback: Repeat playback from the start frame to the end frame until manually stopping the playback operation. ⚫ Single playback: Automatically stops from the start frame to the end frame. 2. Play Order: ⚫ Sequential playback: Plays from the start frame to the end frame. ⚫ Reverse playback: Plays from the end frame to the start frame. 3. Play Interval: Click on the Play Interval menu tab, and you can set the time interval between frames by rotating the knob V0 or directly setting the time interval between frames on the pop-up numeric keyboard. 4.

Start Frame Press Start Frame , then rotate the multifunction knob or use the pop-up numeric keypad to set the start frame of playback. By default, it is 1, and the maximum value is the number of recorded frames. 5. End Frame Press End Frame , then rotate the multifunction knob or use the pop-up numeric keypad to set the end frame of playback. The default is the number of frames of the recorded waveforms. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 140