Hantek — DPO7000 UserManual

System Utility Function Setting EN 13.6 System Click on the [Utility] button area to enter the menu, click on the System menu tab, and enter the system settings menu. 13.6.1 Power On Click on the Power On menu tab and select the system configuration that will be called when the device is powered back on after a power down. You can choose to restore the Default or Last. ⚫ Default: Restore the system to factory settings. ⚫ Last: Reply to the settings from the last time the system was powered down. 13.6.2 Aux Output [Utility] -> More -> System -> AUXOut , enter the Auxiliary Output menu tab, and there are two options: Trigout and Pass/Fail. ⚫ Trigout:

When the oscilloscope generates a hardware trigger, it will output a signal from the auxiliary output connector that reflects the current capture rate of the oscilloscope. Input the signal into the port, display the waveform on the screen, and measure the frequency of the waveform. It is found that the frequency is the same as the current capture rate. ⚫ Pass/Fail: In the pass test, when the oscilloscope detects a pass or fail, a positive Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 141