Decode EN 1. Bus Type: Click on the Bus Type menu tab and select UART from the pop-up menu to configure UART decoding. 2. Bus Status: Click on the Bus Status menu tab and choose to turn on (ON) or off (OFF) the bus switch function. 3. Baud: Click on the Baud menu tab and select Baud Rate from the pop-up menu. 4. Source: Click on the Source menu tab to enter the Source Settings menu. ⚫ Set the Tx source and Threshold Click on the Tx menu tab and select the source channel from the pop-up menu. Click on the Threshold menu label and set the threshold through the multi-functional knob V0 or the pop-up numeric keyboard.
⚫ Set the Rx source and threshold Click on the Rx menu tab and select the source channel from the pop-up menu. Click on the Threshold menu label and set the threshold through the multi-functional knob V0 or the pop-up numeric keyboard. ⚫ Polarity: Click on the Polarity menu tab (select data decoding as positive or negative polarity). Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 149