Hantek — DPO7000 UserManual

Decode EN Click on the Label to display the menu label, and choose to turn it on or off. ⚫ Event Table Click on the Event Table menu tab to enter the event table settings menu. ➢ Event Table The event table can be selected to open or close. ➢ Format Click on the Format menu tab to set the format of the event table. The options include hexadecimal, decimal, binary, and ASC. ➢ View Click on the View menu tab to select Package, Details, and Data. ➢ Export Click on the Export menu label, and when the view selects "package", information such as time and corresponding decoding data can be exported.

➢ Jump Click on the Jump menu tab to display the specified data waveform in the center view of the screen. 6. Setting: Click on the Setting menu tab to enter the Settings menu. ⚫ Endian Click on the Endian menu tab to select either MSB or LSB. ➢ LSB: Least Significant Bit, which means that the low bit of data is transmitted first. ➢ MSB: Most Significant Bit (most significant bit), that is, the high data bits are transmitted first. ⚫ Polarity Click on the Polarity menu tab to select the decoded data as either positive or negative polarity. ⚫ Width Click on the Width menu tab and select the bus width for decoding data through the pop-up menu. 7. Copy Trig:

Click on the Copy Trig menu tab to select the Copy Trigger function. The copy trigger function can quickly apply trigger settings to corresponding types of decoding functions. 14.4 LIN Decoding The oscilloscope samples the LIN signal and determines whether each data point is a logic "1" or a logic "0" based on the set threshold level. LIN decoding requires specifying Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 157