Decode EN ⚫ Timeout mode: frame synchronization is performed based on the timeout time, which must be greater than half a clock cycle. ➢ Time: Click on the Time menu tab and set the timeout value through the multi-functional knob V0 or numeric keyboard. ⚫ CS mode: Contains film selection line CS, and performs frame synchronization based on CS. ➢ Film selection: Click on the CS menu tab and select the desired film selection menu (CH1-CH4, D0-D3, OFF). ➢ CS Polarity: Click on the CS Polarity menu tab to select the polarity (positive or negative). ➢ Threshold: Click on the Threshold menu tab and set the threshold using the multi-functional knob V0 or the numeric keypad. 4. Source:
Click on the Source menu tab to enter the Source Settings menu. ⚫ Set clock signal: ➢ Click on the CLK menu tab and select the clock source channel (CH1-CH4, ➢ Click on the Threshold menu tab and set the threshold using the D0-D3, OFF). multi-functional knob V0 or the numeric keypad. ➢ Click on the Slope menu label and select the edge type positive or negative polarity. ⚫ Set MISO and MOSI: ➢ Click on the MISO menu tab and select the MISO source channel (CH1-CH4, ➢ Click on the Threshold menu tab and set the threshold using the D0-D3, OFF). multi-functional knob V0 or the numeric keypad. ➢ Click on the MOSI menu tab and select the MOSI source channel (CH1-CH4, D0-D3, OFF). ➢ (Reminder:
The MISO and MOSI source channels cannot be set to OFF at the same time.) 5. Display: Click on the Display Menu tab to enter the Display Settings menu. ⚫ Format Click on the Format menu tab, and the available formats include hexadecimal, decimal, binary, and ASCII. ⚫ Position Click on the Position menu tab to set the location. ⚫ Label DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 156