Hantek — DPO7000 UserManual

Decode EN Click on the Parity Bit menu tab and select whether to include inspection positions or not. ⚫ Version: Click on the Version menu tab and select versions 1. x, 2. x, and Both. 6. Display: Click on the Display Menu tab to enter the Display Settings menu. ⚫ Format Click on the Format menu tab, and the available formats include hexadecimal, decimal, binary, and ASCII. ⚫ Position Click on the Position menu tab to set the location. ⚫ Label Click on the Label to display the menu label, and choose to turn it on or off. ⚫ Event Table Click on the Event Table menu tab to enter the event table settings menu. ➢ Event Table The event table can be selected to open or close.

➢ Format Click on the Format menu tab to set the format of the event table. The options include hexadecimal, decimal, binary, and ASC. ➢ View Click on the View menu tab to select Package, Details, and Data. ➢ Export Click on the Export menu label, and when the view selects "package", information such as time and corresponding decoding data can be exported. ➢ Jump Click on the Jump menu tab to display the specified data waveform in the center view of the screen. 7. Copy Trig: Click on the Copy Trig menu tab to select the Copy Trigger function. The copy trigger function can quickly apply trigger settings to corresponding types of decoding functions.

14.5 CAN Decoding The oscilloscope samples CAN or CAN-FD signals at the designated sampling position, and will also determine whether each data point is a logic "1" or a logic "0" based on the set threshold level. CAN decoding requires specifying the CAN or CAN-FD signal type and sampling location. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 159