Decode EN Click [Decode] in the button area to enter the decoding function menu. 1. Bus Type: Click on the Bus Type menu label and select CAN from the pop-up menu to configure CAN decoding. 2. Bus Status: Click on the Bus Status menu tab and choose to turn on (ON) or off (OFF) the bus switch function. 3. Source: Click on the Source menu tab and select the source channel. 4. Threshold: Click on the Threshold menu tab and set the threshold using the multi-functional knob V0 or the numeric keypad. When changing the threshold of the clock channel, a dashed line appears on the screen displaying the current threshold level.
When the change is stopped, the dashed line of the threshold level disappears after about 2 seconds. 5. Setting: Click on the Setting menu tab to enter the Settings menu. ⚫ Signal: Click on the Signal menu label, and the signal types that can be selected are: CAN_ H, CAN_ L, Rx, Tx, Diff. ➢ CAN_ H: Actual CAN_ H-bus signal. ➢ CAN_ L: Actual CAN_ L-bus signal. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 160