Hantek — DPO7000 UserManual

Decode EN ➢ Rx: Received signal from CAN signal line. ➢ Tx: Sending signal from CAN signal line. ➢ Diff: Use a differential probe to connect to the CAN differential bus signal of the analog channel. Positive connection CAN of differential probe_ H-bus signal, negative connection CAN of differential probe_ L-bus signal. ⚫ Baud: Click on the Baud menu tab and select Baud Rate from the pop-up menu. ⚫ Sample Position: Click on the Sample Position menu label and select versions 1. x, 2. x, and Both. 6. Display: Click on the Display Menu tab to enter the Display Settings menu. ⚫ Format Click on the Format menu tab, and the available formats include hexadecimal, decimal, binary, and ASCII.

⚫ Position Click on the Position menu tab to set the location. ⚫ Label Click on the Label to display the menu label, and choose to turn it on or off. ⚫ Event Table Click on the Event Table menu tab to enter the event table settings menu. ➢ Event Table The event table can be selected to open or close. ➢ Format Click on the Format menu tab to set the format of the event table. The ➢ View options include hexadecimal, decimal, binary, and ASC. Click on the View menu tab to select Package, Details, and Data. ➢ Export Click on the Export menu label, and when the view selects "package", information such as time and corresponding decoding data can be exported.

➢ Jump Click on the Jump menu tab to display the specified data waveform in the center view of the screen. 7. Copy Trig: Click on the Copy Trig menu tab to select the Copy Trigger function. The copy trigger function can quickly apply trigger settings to corresponding types of decoding functions. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 161