Hantek — DPO7000 UserManual

Protocol EN V0 or directly set the send data value by popping up the numeric keypad. 4. DataBits: Click the DataBits menu tab and select data bits from the drop-down menu: 4bits, 5bits, 6bits, 7bits, 8bits. 5. Bandrate: Click the Baudrate menu tab and select the desired Baud rate from the drop-down menu or select Custom Baud rate. 6. Idle Level: Click the Idle Level menu tab to select the idle level as High or Low. 7. Parity Check: Click the Parity Check tab to select the check mode as Null, Odd check, or Even check. 8. Trigger Mode: Click the Trigger Mode menu tab and select Auto or Manual. 9. Send Interval:

Click on the Send Interval menu tab to set the interval value by turning the multifunction knob V0 or directly set the interval value by popping up the numeric keypad. 10. Burst: When the trigger mode is set to manual trigger, click the Burst menu tab to manually trigger once. 15.2 LIN Protocol Click the navigation icon [Hantek] to open the protocol generator menu. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 163