Protocol EN 1. Type: Click on the Type menu tab and select the "LIN" type for specific Settings. After selecting the protocol generation type, the menu changes to the LIN Settings menu. 2. Method: Click the Method menu tab to select the following modes: SigFixedValue and SigRandomValue. 3. Identifier: Click on the Identifier menu tab and set the identifier value by rotating the multifunction knob V0 or set the send identifier value directly on the popup numeric keypad. 4. Data: Click on the Data menu tab to set the data values by turning the multifunction knob V0 or by the pop-up numeric keypad directly. 5. Baudrate:
Click the Baudrate menu tab and select the desired Baud rate from the drop-down menu or select Custom Baud rate. 6. Idle Level: Click the Idle Level menu tab to select the idle level as High or Low. 7. DataByte: Click on the DataByte menu tab and select from the drop-down menu: 1 Byte, 2 Byte, 3 DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 164