Hantek — DPO7000 UserManual

Protocol EN 3. FrameID: Click the FrameID menu tab, you can select the label ID as: standard, extended 29 bits. 4. Frame ID data: Click on the Frame ID data menu tab to set the data value by rotating the multifunction knob V0 or directly set the frame ID data value by popping up the numeric keypad. 5. Bandrate: Click the Baudrate menu tab and select the desired Baud rate from the drop-down menu or select Custom Baud rate. 6. Idle Level: Click the Idle Level menu tab to select the idle level as High or Low. 7. FrameType: Click the Frame Type menu tab and select from the drop-down menu: Data frame length 1-8, Remote frame, Error frame, Overload frame. 8. Data:

Click on the Data menu tab to set the data values by turning the multifunction knob V0 or by the pop-up numeric keypad directly. 9. Trigger Mode: Click the Trigger Mode menu tab and select Auto or Manual. 10. Send Interval: Click on the Send Interval menu tab to set the interval value by turning the multifunction knob V0 or directly set the interval value by popping up the numeric keypad. 11. Burst: When the trigger mode is set to manual trigger, click the Burst menu tab to manually trigger once. 15.4 SPI Protocol Click the navigation icon [Hantek] to open the protocol generator menu. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 166