Hantek — DPO7000 UserManual

Protocol EN 1. Type: Click the Type menu tab and select the "SPI" type for specific Settings. After the protocol generation type is selected, the menu changes to the SPI Settings menu. 2. Method: Click the Method menu tab to select the following modes: SigFixedValue and SigRandomValue. 3. BitWide: Click the BitWide menu tab, and the data bit width can be selected from the drop-down menu: 4, 8, 16, 24, 32. 4. Databit: Click on the Databit menu tab to set the data values by turning the multifunction knob V0 or by the pop-up numeric keypad directly. 5. Send rate: Click the Send rate menu tab and select the desired send rate from the drop-down menu or select Custom send rate. 6. ClockEdge:

Click the ClockEdge menu tab to select the clock edge as a rising or falling edge. 7. Trigger Mode: Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 167