Analyze EN 17.3.1 Power Quality Analyzing power quality can test the quality of AC input lines. The specific measurement parameters for power quality analysis include the measurement of electrical parameters such as voltage effective value, current effective value, active power, apparent power, reactive power, power factor, reference frequency, phase angle, impedance, voltage peak factor, and current peak factor at the input end of the power supply In the Power Analysis menu, click the Analysis Type menu tab and select the Power Quality option. 1. Source: Click on the Source menu tab to set the power quality source. You can choose voltage channel, current channel, and frequency reference.
⚫ Voltage channel: Click on the Voltage menu label and select the channels CH1~CH4 for collecting voltage. ⚫ Current channel: Click on the Current menu tab and select the channels CH1~CH4 for collecting current. ⚫ Frequency reference: Click on the Fre.Ref menu tab and set the frequency to be referenced by the voltage channel or current channel. 2. Reference level: Click on the Ref Levels menu tab to enter the settings menu. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 187