Hantek — DPO7000 UserManual

Analyze EN ⚫ Type: Click on the Type menu tab to select the reference level as a percentage or absolute value. ⚫ upper limit: Click on the Upper menu label, and you can set the upper limit value by rotating the knob V0 or directly setting the upper limit value on the pop-up numeric keyboard. When the upper limit value decreases to the current median, the median and lower limit values will automatically decrease to below the upper limit value. ⚫ Median: Click on the Mid menu tab to set the median value by rotating the knob V0 or directly setting the median value on the pop-up numeric keyboard. The median is limited by the upper and lower limits. ⚫ Lower limit:

Click on the Lower menu label, and you can set the upper limit value by rotating the knob V0 or directly set the lower limit value on the pop-up numeric keyboard. When the lower limit value increases to the current median, the median and upper limit values will automatically increase to be higher than the lower limit value. ⚫ Default value: Click on the Default menu tab to restore the upper, middle, and lower limit values to their default values. 3. Count: Click on the Count menu tab, and you can set the frequency meter by rotating the knob V0 or directly set the counting on the pop-up numeric keyboard. 4. Reset: Click on the Reset stat.

menu tab to clear the current data and recalculate the measurement results. 5. Display: Click on the Display menu tab to choose whether to turn on or off the display results. When opened, the results are displayed on the screen, as shown in the following figure. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 188