Hantek — DPO7000 UserManual

Analyze EN 17.5.1 Enable Click on the Function menu tab and choose to open or close the Porter chart. 17.5.2 Parameter settings Click on the Parameter Set menu tab to enter the parameter setting menu. 1. Input Source: Click on the Input Source menu tab to select CH1-CH4 as the input source. The input source is the channel of the input signal, which serves as the reference for the current frequency. Before selecting an input source, it is necessary to connect the measured signal to the analog channel input of the oscilloscope. 2. Output Source: Click on the Output Source menu tab to select CH1-CH4 as the output source. The output source is the channel that connects the feedback output signal.

Before selecting the output source, it is necessary to connect the measured signal to the analog channel output terminal of the oscilloscope. 3. Minimum frequency: Click on the Min Freq menu tab, and the frequencies you can select are: 10Hz, 100Hz, 1KHz, 10KHz, 100KHz, 1MHz, and 10MHz. 4. Maximum frequency: Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 195