Arbitrary Waveform Generator (Option) EN Figure 21.1 sine wave ⚫ Frequency: Click on the Frequency menu tab, and you can set the frequency value directly by rotating the knob V0 or on the pop-up numeric keypad. DC and noise: no frequency parameters. ⚫ Amplitude: Click on the Amplitude menu label, and you can set the amplitude value directly by rotating the knob V0 or on the pop-up numeric keyboard. When the impedance is high, the setting range is 10mVpp~5Vpp; When the impedance is 50 Ω, the setting range is 5mVpp~2.5Vpp. ⚫ Offset: Click on the Offset menu label, and you can set the offset value directly by rotating the knob V0 or on the pop-up numeric keyboard. ⚫ Start Phase:
Click on the Start Phase menu tab, and you can set the phase value directly by rotating the knob V0 or on the pop-up numeric keypad. Set the range to 0 °~360 °. ⚫ Align Phase: Click on the Align Phase menu tab and reconfigure the two channels to output according to the set frequency and phase. For two signals with the same frequency or a multiple frequency relationship, pressing the same phase can align the two phases. Use DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 214