Hantek — DPO7000 UserManual

Arbitrary Waveform Generator (Option) EN an oscilloscope to collect waveforms from two channels, and after stable display, switch the channel switch state. The phase difference between the two waveforms will change. Press the same phase button, and the two waveforms will automatically recover the phase difference of the current phase. ⚫ Setting: Click on the Setting menu tab to select the types as None, Modulation, or Burst. ⚫ Impedance: Click on the Impedance menu tab to select the output impedance of the signal generator as high impedance or 50 Ω. 2. Output square wave: Click on the Wave menu tab and select Square Wave from the pop-up menu.

Figure 21.2 square wave Please refer to the " Output Sine Wave " section for setting parameters. The fixed duty cycle of the square wave is 50%. 3. Output Ramp wave: Click the Wave menu label, and select Ramp wave in the pop-up menu. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 215