Arbitrary Waveform Generator (Option) EN Figure 21.16 FM ⚫ Modulation waveform: Click on the Waveform menu tab to select waveforms such as sine wave, square wave, triangular wave, and noise. ⚫ Frequency: Click on the Frequency menu tab, and you can set the frequency value directly by rotating the knob V0 or on the pop-up numeric keypad. ⚫ Deviation: Click on the Deviation menu label, and you can set the deviation value by rotating the knob V0 or directly setting it on the pop-up numeric keyboard. 3. PM:
The modulation method in which the deviation of the carrier phase from its reference phase varies proportionally with the instantaneous value of the modulated signal is called phase modulation, or phase modulation. There is a close relationship between phase modulation and frequency modulation. During phase modulation, frequency modulation occurs simultaneously; During frequency modulation, phase modulation also occurs simultaneously, but the changing patterns of the two are different. ⚫ Modulation waveform: Click on the Waveform menu tab to select waveforms such as sine wave, square wave, Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 229