Hantek — DPO7000 UserManual

Arbitrary Waveform Generator (Option) EN Figure 21.15 AM ⚫ Modulation waveform: Click on the Waveform menu tab to select waveforms such as sine wave, square wave, triangular wave, and noise. ⚫ Frequency: Click on the Frequency menu tab, and you can set the frequency value directly by rotating the knob V0 or on the pop-up numeric keypad. ⚫ Modulation depth: Click on the AM Depth menu tab, and you can set the modulation depth by rotating the knob V0 or directly setting it on the pop-up numeric keyboard. The modulation depth represents the strength of amplitude modulation.

At 0% modulation, the output amplitude is half of the carrier signal amplitude; At 100% modulation, the output amplitude is equal to the carrier signal amplitude; When the modulation is greater than 100%, envelope distortion will occur, which needs to be avoided in actual circuits. 2. FM: Frequency Modulation (FM) refers to the frequency of a carrier wave that changes with the modulation wave. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 228