Hantek — DPO7000 UserManual

Arbitrary Waveform Generator (Option) EN Click on the Impedance menu tab and select high resistance or 50 ohms. 21.3 Modulation The signal generator of this series of oscilloscopes has three modulation methods: amplitude modulation, frequency modulation, and phase modulation. The modulated waveform consists of a carrier wave and a modulated wave. The carrier signal is a waveform signal output by the signal generator, and the modulation signal can be selected from the sine wave, square wave, triangular wave, and noise built-in in the signal generator. Click on the button area [G1] , go to More -> Setting -> Type -> Modulation to enter the modulation settings menu.

Click on the Type menu tab to select amplitude modulation (AM), frequency modulation (FM), and phase modulation (PM). 1. AM: Amplitude Modulation (AM) refers to the variation of the amplitude of the carrier wave with the modulation wave. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 227