Hantek — DPO7000 UserManual

Arbitrary Waveform Generator (Option) EN Click on the Offset menu label, and you can set the offset value directly by rotating the knob V0 or on the pop-up numeric keyboard. ⚫ Linear Interp: Click the Linear Interp menu tab, and you can choose to turn linear interpolation on or off. ➢ Open: The waveform editor connects two defined points with a straight line. ➢ Close: The waveform editor will maintain a constant voltage level between two points and establish a stepped waveform. ⚫ Edit Points: Click on the Edit Points menu tab to enter the point editing settings menu, and define the waveform by assigning a voltage value to it. ➢ PonitX:

Click on the PointX menu label, and you can set the current point directly by rotating the knob V0 or on the pop-up numeric keyboard. ➢ Coltage: Click on the Coltage menu tab, and you can set the voltage value directly by rotating the knob V0 or on the pop-up numeric keypad. ➢ Insert: Click on the Insert menu tab to insert a new editable point at the midpoint of the current and next editing points, and the initialization points will automatically increase by 1. If you continue to press Insert , you can add editable points one by one. ➢ Delete: Click the Delete menu tab to delete the current point from the waveform, and ➢ Zoom: the remaining points are connected using interpolation.

Click on the Zoom in menu tab to select whether to turn on or off the horizontal time base zoom in function. ➢ Apply: Click on the Apply menu tab to output any currently edited waveform. ⚫ Save any wave: Click on the Save menu tab to enter the Save Settings menu. Refer to the instructions in the " Store and Load " section. 5. Setting: Click on the Setting menu tab and select None, Modulation, or Burst. 6. Start Phase: Click on the Start Phase menu tab, and you can set the phase value directly by rotating the knob V0 or on the pop-up numeric keypad. 7. Impedance: DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 226