Remote Control EN 3. Search for device resources Open IO and the software will automatically search for resources currently connected to the PC through a USB interface. You can also click Rescan to search. 4. View Device Resources The searched resources will appear in the USB (USB0) directory, displaying the machine model, serial number, version information, and USB interface information. 5. Control the instrument remotely Click on Interactive IO in the IO interface to open the remote command control panel, where you can send commands and read data. 22.2 Remote Control via LAN 1. Connect the device Connect the oscilloscope to your local area network using a network cable. 2.
Configure network parameters Configure the network parameters of the oscilloscope according to the instructions in the section on LAN Configuration . 3. Search for device resources Open IO and click Rescan to search for devices. 4. View Device Resources The name of the oscilloscope found is displayed on LAN (TCPIP0). 5. Control the instrument remotely Click on Interactive IO in the IO interface to open the remote command control panel, where you can send commands and read data. 22.3 Remote Control via RS232 1. Connect the device Connect the oscilloscope to your local area network using an RS232 serial cable. Note: Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 233