Hantek — DPO7000 UserManual

Troubleshooting EN 23.4 The touch functions cannot be used normally 1. Check if the touch screen function is turned on. If it is not, click [Touch Lock] in the button area to turn on the touch screen function. 2. Check if there is any dirt on the screen or fingers. If there is, please clean it first. 3. Check if the oscilloscope is close to a strong magnetic field. If it is close to a strong magnetic field, please stay away first. If you still cannot use the touch screen, please contact Hantek technical support department in a timely manner. 23.5 The USB storage device cannot be recognized 1. Check if the USB drive is functioning properly. 2. Confirm the capacity of the USB flash drive.

It is recommended to use a USB flash drive that does not exceed (16G) for this oscilloscope. 3. Confirm that the format of the USB drive is FAT32 format. 4. Reopen the oscilloscope and reinsert the USB drive for inspection. If you still cannot use the USB drive, please contact Hantek Technical Support Department in a timely manner. 23.6 The instrument cannot start normally 1. Check if the power switch of the machine is turned on. 2. Check if the power plug of the oscilloscope is properly connected. 3. Check if the fuse is intact. If a fuse needs to be replaced, please use a fuse that meets the specifications of this product. 4.

Turn on the machine again and see if it can be turned on normally. If the machine still cannot be opened, please contact Hantek Technical Support Department in a timely manner. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 236