Hantek — DPO7000 UserManual

Quick start EN Figure 4.2 Side view 4.3 Preparation before use 1. To Adjust the Supporting Legs There is a bracket design at the bottom of the machine, and the bracket should be adjusted appropriately to tilt the oscilloscope slightly upwards, which can better stabilize the placement of the oscilloscope and facilitate observation and operation. When not using the machine, simply close the bracket. 2. To Connect to AC Power The specifications of the AC power supply that this oscilloscope can input are: 100-120V, Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 11