Quick start EN 50/60/400Hz; 100-240V, 50/60Hz. Please connect the oscilloscope to the power supply using the power cord provided in the attachment, as shown in the figure. Figure 4.3 To Connect to AC Power Warning: To avoid electric shock, ensure that the instrument is correctly grounded. 3. Turn-on Checkout When the machine is properly plugged in and the oscilloscope is powered on, press the power button in the lower left corner of the front panel to start the oscilloscope. During the startup process, all the button lights on the front panel will light up for a few seconds, and the oscilloscope will perform a series of self checks.
After the self check is completed, the startup screen will appear. 4. Function Inspection ⚫ Click on [Default Setup] in the button area to restore the oscilloscope to its factory settings. ⚫ Connect the grounding crocodile clamp wire of the probe to the grounding terminal in the figure below. ⚫ Connect the probe to the input terminal of channel 1 and the compensation signal output terminal marked in the figure below. DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 12