Hantek — DPO7000 UserManual

To Set the Vertical System EN 5.7 Input Impedance This oscilloscope provides two input impedance modes: 1M Ω and 50 Ω to reduce the circuit load caused by the interaction between the oscilloscope and the circuit under test. Open [CH1] , click on the Impedance menu tab, and select an input impedance of 1M Ω or 50 Ω. ⚫ 1M Ω: At this point, the input impedance of the oscilloscope is very high, and the current flowing into the oscilloscope from the tested circuit can be ignored. ⚫ 50 Ω: Match the oscilloscope with a device with an output impedance of 50 Ω.

5.8 Waveform Invert Open [CH1] , click on the inverting menu, select the inverting switch flag to turn it on or off, and the flag will light up to turn on the waveform inverting function. The default is to turn off inverting. Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 37 5X 5:1 10X 10:1 20X 20:1 50X 50:1 100X 100:1 200X 200:1 500X 500:1 1000X 1000:1 2000X 2000:1 5000X 5000:1 10000X 10000:1 20000X 20000:1 50000X 50000:1