To Set the Vertical System EN 5.14 Channel Label This series of oscilloscopes can have additional channel labels set. Click on [CH1] , click on the Label menu, and enter the settings menu. ⚫ Display: Click on the Display the menu label, choose to open or close the channel label, open the label, and the set label will be displayed on the left side of the waveform. The label defaults to 1. ⚫ Library: Click on the Library menu tab to select tags such as ADO, ADDR, BIT, CAS, CLK, etc. ⚫ Label: Click on the Label menu label, and the label editing keyboard will automatically pop up. Through the touch function, enter the label name on the keyboard.
In the virtual keyboard, click the Select Case switch and rotate the multi-functional knob V0 to select letters. After entering, press the key to end editing. You can also use the touch screen function to operate through touch gestures. If the Display is turned on, the set label will be displayed on the left side of the CH1 waveform. If the inputted characters are deleted or modified, they can be achieved through the multi-functional knob V0 or by using the touch screen function: ⚫ Using a multifunctional knob: You can only delete the character until it needs to be deleted or modified by pressing the delete button. If you modify characters, you need to re-enter the required characters.
⚫ Using the touch screen function: simply position the cursor to the right of the character that needs to be deleted or modified through a touch gesture, and press Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 41