To Set the Horizontal System EN 6.1 To Adjust the Horizontal Position Horizontal displacement refers to the displacement of the waveform trigger points of all channels in the horizontal direction relative to the center of the screen. When the waveform trigger point is located on the left (right) side of the screen center, the horizontal displacement is positive (negative). When changing the horizontal displacement, the waveform trigger points and displayed waveforms of all channels move left and right; The horizontal displacement information above the screen changes in real-time. The horizontal displacement can be adjusted by the following methods:
⚫ Click on the horizontal label at the top of the screen, and in the pop-up menu, enter the displacement value directly or click the increase/decrease knob on the right to set the displacement, as shown in the following figure. ⚫ Adjust the horizontal displacement by rotating the horizontal displacement knob. ⚫ Adjust the horizontal displacement by dragging the gesture, and the horizontal trigger position icon on the screen will move left and right with the sliding of the hand. Please refer to the Drag section for specific operations.
6.2 To Adjust the Horizontal Time Base The horizontal time base is the time value represented by each grid in the horizontal direction of the display screen, generally expressed as s/div. The adjustable range of the horizontal time base is 500ps/div~1000s/div. The default value is 1us/div. Change the horizontal time base, and the horizontal time base information will be displayed in real-time on the screen. The horizontal time base can be adjusted by the following methods: DPO7000 User manua l Copyright © Qingdao Hantek Electronic Co., LTD 44