To Set the Horizontal System EN ⚫ Click on the horizontal label at the top of the screen, and in the pop-up menu, enter the time base value directly or click the increase/decrease knob on the right to set the time base, as shown in the following figure. ⚫ Adjust the horizontal time base by rotating the horizontal time base knob. ⚫ Adjust the horizontal time base through the pinching gesture of the touch function. Please refer to the Pinch section for specific operations.
6.3 Pan or zoom single acquisition or stopped acquisition After the oscilloscope stops, the stopped display may contain several collected data with useful information, but only the last collected data can be panned and scaled. Pan and zoom the data collected in a single or stopped collection. 6.4 Delayed Sweep Delay scanning is used to horizontally amplify a section of waveform in order to view waveform details. Click the [Zoom] button in the button area, and the screen is divided into two display areas. Figure 6.1 Delayed Sweep Mode Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 45