Hantek — DPO7000 UserManual

To Trigger the Oscilloscope EN 8 To Trigger the Oscilloscope The so-called triggering refers to setting certain triggering conditions according to requirements. When a certain waveform in the waveform flow meets this condition, the oscilloscope immediately captures the waveform and its adjacent parts, and displays them on the screen. The trigger determines when the oscilloscope starts acquiring data and displaying waveforms. Once the trigger is set correctly, the oscilloscope can convert unstable displays or blank screens into meaningful waveforms. Here are some basic concepts of triggers. You can enter the trigger menu by: ⚫ Click on the button area [Trig Menu] to enter the trigger menu.

⚫ Click on the trigger tab at the top of the screen (as shown in the figure below), and a simple trigger menu will pop up on the screen. This chapter includes: ⚫ Trigger LEVEL ⚫ Trigger Sensitivity ⚫ Trigger Source ⚫ Trigger Mode ⚫ Trigger Holdoff ⚫ Trigger Type Copyright © Qingdao Hantek Electronic Co., LTD DPO7000 User manual 57